View LQ150X1LW71N_1152946.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PRODUCT SPECIFICATIONS Mobile Liquid Crystal Displays Group
LQ150X1LW71N
TFT-LCD Module
Spec. Issue Date: Sept 2, 2005 No: LD-15218A
RECORDS OF REVISION
LQ150X1LW71N SPEC No. DATE
REVISED
SUMMARY PAGE
NOTE
No. LD-15218 LD-15218A FEB. 24. 2003 SEP. 2. 2005 1
1st Issue COVER Add the document about the ROHS directive Post name change
18
Add
R.C.mark (for RoHS)
at packing form
LD-15218A-1 1. Application This specification applies to the color 15.0 XGA TFT-LCD module LQ150X1LW71N.
These specification sheets are the proprietary product of SHARP CORPORATION("SHARP) and include materials protected under copyright of SHARP. Do not reproduce or cause any third party to reproduce them in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP.
The device listed in this technical literature was designed and manufactured for use in OA equipment.
In case of using the device for applications such as control and safety equipment for transportation(aircraft, trains, automobiles, etc. ), rescue and security equipment and various safety related equipment which require higher reliability and safety, take into consideration that appropriate measures such as fail-safe functions and redundant system design should be taken.
Do not use the device for equipment that requires an extreme level of reliability, such as aerospace applications, telecommunication equipment(trunk lines), nuclear power control equipment and medical or other equipment for life support.
SHARP assumes no responsibility for any damage resulting from the use of the device which does not comply with the instructions and the precautions specified in these specification sheets.
Contact and consult with a SHARP sales representative for any questions about this device.
LD-15218A-2 2. Overview This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).
It is composed of a color TFT-LCD panel, driver ICs, control circuit, power supply circuit and a back light unit. Graphics and texts can be displayed on a 1024 RGB 768 dots panel with about 16 million colors by using
LVDS (Low Voltage Differential Signaling) and supplying +3.3V DC supply voltages for TFT-LCD panel driving and supply voltage for backlight. It is a wide viewing-angle-module (Vertical viewing angle:170 Horizontal viewing angle:170 ,CR 10).
3. Mechanical Specifications Parameter Display size Specifications 38 (Diagonal) 15.0 (Diagonal) Active area Pixel format 304.1 (H) 1024 (H) (1 pixel Pixel pitch Pixel configuration Display mode Unit outline dimensions *1 Mass Surface treatment 0.297 (H) 228.1 (V) 768 (V) R+G+B dots) 0.297 (V) mm Unit cm Inch mm Pixel
R, G, B vertical stripe Normally black 331.6(W) 254.76(H) 12.5(D) mm g
1300(MAX) Anti-glare and hard-coating 3H (Haze value = 25)
*1.Note: excluding back light cables. The thickness of module (D) doesn't contain the projection. Outline dimensions are shown in Fig.1.
LD-15218A-3 4. Input Terminals 4-1. TFT-LCD panel driving CN1 (Interface signals and +3.3V DC power supply) Using connectors DF14H-20P-1.25H (Hirose Electric Co., Ltd.) Corresponding connectors DF14-20S-1.25C(Connector) DF14-2628SCFA(Terminal) Using LVDS Receiver Contained in a control IC. [THC63LVDF84A(Thine) compatible] Corresponding LVDS Transmitter THC63LVDM83R(Thine) or compatible
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Symbol Vcc Vcc GND GND Rx0Rx0+ GND Rx1Rx1+ GND Rx2Rx2+ GND CKCK+ GND Rx3Rx3+ GND GND
Function +3.3V Power supply +3.3V Power supply Ground Ground LVDS CH0 data signal (-) LVDS CH0 data signal (+) Ground LVDS CH1 data signal (-) LVDS CH1 data signal (+) Ground LVDS CH2 data signal (-) LVDS CH2 data signal (+) Ground LVDS CK- data signal (-) LVDS CK+ data signal (+) Ground LVDS CH3 data signal (-) LVDS CH3 data signal (+) Ground Ground
Remark
LVDS LVDS LVDS LVDS LVDS LVDS LVDS LVDS LVDS LVDS
LD-15218A-4 DATA Mapping Transmitter Pin No. Data 51 TA0 52 TA1 54 TA2 55 TA3 56 TA4 3 TA5 4 TA6 6 TB0 7 TB1 11 TB2 12 TB3 14 TB4 15 TB5 19 TB6 20 TC0 22 TC1 23 TC2 24 TC3 27 TC4 28 TC5 30 TC6 50 TD0 2 TD1 8 TD2 10 TD3 16 TD4 18 TD5 25 TD6 Input Signal R0 (LSB) R1 R2 R3 R4 R5 G0 (LSB) G1 G2 G3 G4 G5 B0 (LSB) B1 B2 B3 B4 B5 (NA) (NA) DE R6 R7 (MSB) G6 G7 (MSB) B6 B7 (MSB) (NA)
1 cycle RxCKIN+ RxCKIN-
RxIN0+ RxIN0-
RxIN1+ RxIN1-
RxIN2+ RxIN2RxIN3+ RxIN3DE: Display Enable NA: Not Available
LD-15218A-5
4-2 Interface block diagram
Using receiver Contained in a control IC. THC63LVDM83A(THine electronics),DS90C383,DS90C383A(National semiconductor)
Corresponding Transmitter
LD-15218A-6 4-2. Backlight CN 2, 3, 4, 5 The module-side connector The user-side connector Pin no. 1 2 symbol
H
BHSR-02VS-1
(JST) (JST)
SM02B-BHSS-1-TB Function
Power supply for lamp Ground
(High voltage side)
GND
5. Absolute Maximum Ratings Parameter Supply voltage Storage temperature Symbol Condition Vcc TSTG Ta=25 0 25 0 40 ) or less. ( Ta>40 ) Ratings + 4.0 + 60 +50 Note1 Unit Remark
Operating temperature (Ambient) TOPA Note1 Humidity 95%RH Max. ( Ta
Maximum wet-bulb temperature at 39 No condensation.
LD-15218A-7 6. Electrical Characteristics 6-1. TFT-LCD panel driving Parameter Vcc Supply voltage Current dissipation Permissive input ripple voltage Terminate Resister Note1 1 On-off sequences of Vcc and data 0 0 0 t1 t2 t3 t4 60ms 10ms 1s 100ms
t3 t4 t1 t2
Ta Symbol Vcc Icc VRF RT 100 Min. +3.0 Typ. +3.3 630 Max. +3.6 850 100 Unit V mA mVp-p
25
Remark Note1 Note2 Vcc=+3.3V
Vcc
2.8V
2.8V
Vcc
LVDS 0.3V 0.3V
LVDS
2
Dip conditions for supply voltage 1) td 2) V2 Vcc 10ms V2 V1
V1 : 3.0V V2 : 2.4V V2 V1
Vcc
Vcc-dip conditions should also follow the on-off conditions.
Note2
Typical current situation : 253-gray-bar pattern Vcc=+3.3V, CK=65MHz Gray scale : GS(n) n=0 252
The explanation of each gray scale, GS(n), is described below section 8.
LD-15218A-8 6-2. Backlight The back light system is an edge-lighting type with 4 CCFTs (Cold Cathode Fluorescent Tube). The characteristics of the lamp are shown in the following table. The value mentioned below is at the case of one CCFT. CCFT Model Name Parameter Lamp current range Lamp voltage Lamp power consumption Lamp frequency Kick-off voltage Lamp life time Note1 KTBE222MSTF-320MA262-Z (STANLEY ELECTRIC CO., LTD. Symbol Min. Typ. Max. Unit Remark IL 3.5 6.5 7.5 mArms Note1 VL 615 700 Vrms Ta=25 ,IL=6.5mArms PL 4.0 4.55 W Note2 ,IL=6.5mArms FL 40 60 70 KHz Note3 Vs 1080 Vrms Ta=25 Note4 1480 Vrms Ta=0 Note4 TL 50,000 Hour IL=6.5mArms Note5
A lamp can be light in the range of lamp current shown above. Maximum rating for current is measured by high frequency current measurement equipment connected to VLOW at circuit showed below. (Note : To keep enough kick-off voltage and necessary steady voltage for CCFT.) Lamp frequency : 40 70kHz Ambient temperature : 0 50
VL ) . Referential data per one CCFT by calculation ( IL The data does not include loss at inverter . Note3 Lamp frequency of inverter may produce interference with horizontal synchronous frequency, and this may cause horizontal beat on the display. Therefore, adjust lamp frequency, and keep inverter as far as from module or use electronic shielding between inverter and module to avoid interference. Note4 Kick-off voltage value is described as the index in the state of lamp only. The kick-off voltage is estimated to be risen up as approx. +200V in the state of module only, and the further rise up can be seen according to the assembling status of user cabinet. Please set the kick-off voltage of inverter to avoid the lighting failures in the state of operation. Please design the inverter so that its open output voltage can be connected for more than 1 second to startup. Otherwise, the lamp may not be turned on. But, please set as 100ms when the ambient luminance around the lamp is more than 1lux. Note5 Lamp life time is defined as the time when either or occurs in the continuous operation under the condition of Ta=25 and the lamp current value indicated to the Remark . Brightness becomes 50% of the original value under standard condition. Kick-off voltage at Ta=0 exceeds maximum value,1480Vrms . Note The performance of the backlight, for example lifetime or brightness, is much influenced by the characteristics of the DC-AC inverter for the lamp. When you design or order the inverter, please make sure that a poor lighting caused by the mismatch of the backlight and the inverter (miss-lighting, flicker, etc.) never occurs. When you confirm it, the module should be operated in the same condition as it is installed in your instrument. Use the lamp inverter power source incorporating such safeguard as overvoltage / overcurrent protective circuit or lamp voltage waveform detection circuit, which should have individual control of each lamp. In case one circuit without such individual control is connected to more than two lamps, excessive current may flow into one lamp when the other one is not in operation. Note2
LD-15218A-9 7. Timing characteristics of input signals 7-1-1. Timing characteristics
Parameter Frequency Horizontal period
Symbol 1/Tc TH
Min. 60 1056 16.0
Typ. 65 1344 20.7
Max. 85 1720 23.4 1024
Unit MHz clock s clock line ms line
Remark
Horizontal period (High) Vertical period
THd TV
1024 773 13.3 806 16.7
1008 18.1 768
Note
Vertical period (High) Note
TVd
768
In case of using the long vertical period, the deterioration of display quality, flicker etc. may occur.
DE DATA (R,G,B)
DE
LD-15218A-10 7-2 Input Data Signals and Display Position on the screen Graphics and texts can be displayed on a 1024 24 bit data signal (8bit/color [253 gray scales] RGB 3 ). 768 dots panel with 16M colors by supplying
R1 G1 B1 R2 G2 B2
RGB
LD-15218A-11 8. Input Signals, Basic Display Colors and Gray Scale of Each Color
Data signal
Colors & Gray
R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7
Gray scale Scale Black Blue Green Cyan Red Magenta Yellow White Black GS0 GS1 Darker GS2 0 0 0 0 X X X X 0 1 0 0 0 0 0 X X X X 0 0 1 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 X X 0 0 X X 0 0 0 0 0 X X 0 0 X X 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 X 0 X 0 X 0 X 0 0 0 0 X 0 X 0 X 0 X 0 0 0 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0
0 : Low level voltage,
total 24 bit data signals, the 16-million-color display can be achieved on the screen.
Basic Color Gray Scale of Red Gray Scale of Green Gray Scale of Blue
Brighter
GS250 GS251
0 1 X 0 0 0
1 1 X 0 0 0
0 0 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
0 0 0 0 1 0
0 0 0 0 0 1
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
Red Black
GS252 GS0 GS1
Darker
GS2
Brighter
GS250 GS251
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 1 X 0 0 0
1 1 X 0 0 0
0 0 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
0 0 0 0 1 0
0 0 0 0 0 1
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
Green Black
GS252 GS0 GS1
Darker
GS2
Brighter
GS250 GS251
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 1 X
1 1 X
0 0 1
1 1 1
1 1 1
1 1 1
1 1 1
1 1 1
Blue
GS252
1 : High level voltage.
X :Don't care.
Each basic color can be displayed in 253 gray scales from 8 bit data signals. According to the combination of
LD-15218A-12 9. Optical Characteristics Ta=25 Parameter
Viewing angle
Vertical
, Vcc =+3.3V Remark
Note1,4
Symbol 11 12
Condition CR 10
Min. 70 70
Typ. 85 85 85 400 25
Max.
Unit Deg. Deg. Deg.
range
Horizontal
21,
22 =0
70 300 0.283 0.299 0.608 0.309 0.250 0.570 0.114 0.057
Contrast ratio Response Time Chromaticity of White Chromaticity of Red Chromaticity of Green Chromaticity of Blue Td+Tr Wx Wy Rx Ry Gx Gy Bx By
Note2,4
55 0.343 0.359 0.668 0.369 0.310 0.630 0.174 0.117
ms
Note3,4 Note4
0.313 0.329 0.638 0.339 0.280 0.600 0.144 0.087
FL=
Luminance of white
YL
200
250
cd/m
2
(IL=6.5mA 60kHz rms Note4
White Uniformity
w
1.25
Note5
The measurement shall be executed 30 minutes after lighting at rating.
The optical characteristics shall be measured in a dark room or equivalent state with the method shown in Fig.2 below.
LD-15218A-13 Note1 Definitions of viewing angle range:
' Note2 Definition of contrast ratio: The contrast ratio is defined as the following.
Luminance (brightness) with all pixels white
Contrast Ratio (CR)
Luminance (brightness) with all pixels black
Note3
Definition of response time: The response time is defined as the following figure and shall be measured by switching the input
signal for "black" and "white".
Note4 Note5
This shall be measured at center of the screen. Definition of white uniformity: White uniformity is defined as the following with five measurements
256
Photodetector output (Relative Value)
(A
512
E).
768 pixel
Maximum Luminance of five points (brightness) Minimum Luminance of five points (brightness)
A C B E D 192 384 576 pixel
LD-15218A-14 10. Handling Precautions a) b) Be sure to turn off the power supply when inserting or disconnecting the cable. Be sure to design the cabinet so that the module can be installed without any extra stress such as warp or twist. c) d) e) f) Since the front polarize is easily damaged, pay attention not to scratch it. Since long contact with water may cause discoloration or spots, wipe off water drop immediately. When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. Handle with care. g) Since CMOS LSI is used in this module, take care of static electricity and take the human earth into consideration when handling. h) Make sure the four mounting holes of the module are grounded sufficiently. Take electro-magnetic interference (EMI) into consideration. i) The module has some printed circuit boards (PCBs) on the back side. Take care to keep them form any stress or pressure when handling or installing the module; otherwise some of electronic parts on the PCBs may be damaged. j) k) Observe all other precautionary requirements in handling components. When some pressure is added onto the module from rear side constantly, it causes display non-uniformity issue, functional defect, etc. So, please avoid such design. l) When handling LCD modules and assembling them into cabinets, please be noted that long-term storage in the environment of oxidization or deoxidization gas and the use of such materials as reagent, solvent, adhesive, resin, etc. which generate these gasses, may cause corrosion and discoloration of the LCD modules.
11. Packing form a) Piling number of cartons : maximum 5 cartons b) Packing quantity in one carton : c) Carton size : 319mm(W) 5 module 280mm(D)
402mm(H)
d) Total mass of one carton filled with full modules : 8.2kg e) Packing form is shown in Fig.3
LD-15218A-15 12 No. 1 2 3 4 5 6 Reliability test items Test item High temperature storage test Low temperature storage test High temperature & high humidity operation test High temperature operation test Low temperature operation test Vibration test (non- operating) Conditions Ta = 60 Ta = -25 Ta = 40 Ta = 50 Ta = 0 Frequency : 10 : 58 240h 240h ; 95%RH 240h ) 240H 57Hz/Vibration width (one side) : 0.075mm 500Hz/Gravity : 9.8m/s2 240h
(No condensation) (The panel temp. must be less than 60
Wave form : sin wave Sweep time : 11minutes Test period : 3 hours (1 hour for each direction of X,Y,Z) 7 Shock test (non- operating) Max. gravity : 490m/s2 Pulse width : 11ms, sine wave Direction : Result Evaluation Criteria Under the display quality test conditions with normal operation state, these shall be no change which may affect practical display function. X, Y, Z, once for each direction.
13
Others 1) Lot No. and indication Bar Code Label:
2) Packing Label
LQ150X1LW71N
Bar code
Model No. (LQ150X1LW71N)
Lot No. (Date)
Bar code 5 Bar code
Quantity
LD-15218A-16 3) Adjusting volume have been set optimally before shipment, so do not change any adjusted value. If adjusted value is changed, the specification may not be satisfied. 4) Disassembling the module can cause permanent damage and should be strictly avoided. 5) Please be careful since image retention may occur when a fixed pattern is displayed for a long time. 6) The chemical compound which causes the destruction of ozone layer is not being used. 7) Warning of mercury and material information of LPG (Light Pipe Guide) are labeled on the back of the module. MATERIAL INFORMATION >PLASTIC LIGHT GUIDE:PMMA< 8)Cold cathode fluorescent lamp in LCD PANEL contains a small amount of mercury, Please follow local ordinances or regulations for disposal. (put on the back of the module. )
9) When any question or issue occurs, it shall be solved by mutual discussion.
Carton storage condition Temperature Humidity 0 to 40
95%RH or less 20 5 to 35 to 15 , 85%RH or less , 85%RH or less (summer) (winter)
Reference condition : :
the total storage time (40 Sunlight Atmosphere
,95%RH) : 240H or less
Be sure to shelter a product from the direct sunlight. Harmful gas, such as acid and alkali which bites electronic components and/or wires must not be detected.
Notes
Be sure to put cartons on palette or base, don't put it on floor, and store them with removing from wall Please take care of ventilation in storehouse and around cartons, and control changing temperature is within limits of natural environment
Storage period
1 year
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Suggested applications (if any) are for standard use; See Important Restrictions for limitations on special applications. See Limited Warranty for SHARP's product warranty. The Limited Warranty is in lieu, and exclusive of, all other warranties, express or implied. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE AND FITNESS FOR A PARTICULAR PURPOSE, ARE SPECIFICALLY EXCLUDED. In no event will SHARP be liable, or in any way responsible, for any incidental or consequential economic or property damage.
NORTH AMERICA
EUROPE
JAPAN
SHARP Microelectronics of the Americas 5700 NW Pacific Rim Blvd. Camas, WA 98607, U.S.A. Phone: (1) 360-834-2500 Fax: (1) 360-834-8903 Fast Info: (1) 800-833-9437 www.sharpsma.com
SHARP Microelectronics Europe Division of Sharp Electronics (Europe) GmbH Sonninstrasse 3 20097 Hamburg, Germany Phone: (49) 40-2376-2286 Fax: (49) 40-2376-2232 www.sharpsme.com
SINGAPORE
SHARP Corporation Electronic Components & Devices 22-22 Nagaike-cho, Abeno-Ku Osaka 545-8522, Japan Phone: (81) 6-6621-1221 Fax: (81) 6117-725300/6117-725301 www.sharp-world.com
TAIWAN
KOREA
SHARP Electronic Components (Taiwan) Corporation 8F-A, No. 16, Sec. 4, Nanking E. Rd. Taipei, Taiwan, Republic of China Phone: (886) 2-2577-7341 Fax: (886) 2-2577-7326/2-2577-7328
SHARP Electronics (Singapore) PTE., Ltd. 438A, Alexandra Road, #05-01/02 Alexandra Technopark, Singapore 119967 Phone: (65) 271-3566 Fax: (65) 271-3855
SHARP Electronic Components (Korea) Corporation RM 501 Geosung B/D, 541 Dohwa-dong, Mapo-ku Seoul 121-701, Korea Phone: (82) 2-711-5813 ~ 8 Fax: (82) 2-711-5819
CHINA
HONG KONG
SHARP Microelectronics of China (Shanghai) Co., Ltd. 28 Xin Jin Qiao Road King Tower 16F Pudong Shanghai, 201206 P.R. China Phone: (86) 21-5854-7710/21-5834-6056 Fax: (86) 21-5854-4340/21-5834-6057 Head Office: No. 360, Bashen Road, Xin Development Bldg. 22 Waigaoqiao Free Trade Zone Shanghai 200131 P.R. China Email: smc@china.global.sharp.co.jp
SHARP-ROXY (Hong Kong) Ltd. 3rd Business Division, 17/F, Admiralty Centre, Tower 1 18 Harcourt Road, Hong Kong Phone: (852) 28229311 Fax: (852) 28660779 www.sharp.com.hk Shenzhen Representative Office: Room 13B1, Tower C, Electronics Science & Technology Building Shen Nan Zhong Road Shenzhen, P.R. China Phone: (86) 755-3273731 Fax: (86) 755-3273735

▲Up To Search▲

Price & Availability of LQ150X1LW71N

	To Download LQ150X1LW71N Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .